Videos
Hobie Kayak Tech
Horizontal Rod Holder installation
- Parent Category: Videos
- Category: Hobie Kayak Tech
- Published on Saturday, 16 July 2011 15:29
- Written by Josh
A quick 'how to' video of Morgan Promnitz showing how to install the Horizontal Rod Holder on a Hobie kayak. This holder is an exciting kit that will keep you fishing rods secure and protected along the side of your kayak or boat. Easy to install and includes the hardware necessary. Fits nearly all kayaks.
How to Repair a Dented Kayak
- Parent Category: Videos
- Category: Hobie Kayak Tech
- Published on Thursday, 07 July 2011 15:19
- Written by Josh
This video shows you how to repair a dented kayak. We boil some water ahead of time, then we use air pressure inside the hull while applying the hot water to the dented area. Once its hot the material will get soft and the air pressure will get the dent to mostly pop back out. This was a fairly severe dent that we purposely put into the hull to show the repair technique... so we had to use a bit more force by hand than just the pressure to remove - but as you can see it is a fairly simple repair to make at home.
Large screen Fish Finder Install by Hobie Kayaks
- Parent Category: Videos
- Category: Hobie Kayak Tech
- Published on Thursday, 07 July 2011 15:18
- Written by Josh
Installing a Lowrance Elite 5 fishfinder / GPS / chartplotter on a Hobie Mirage Revolution using the Hobie large screen fish finder installation kit.
Hobie Kayak SideKick AMA Kit Installation
- Parent Category: Videos
- Category: Hobie Kayak Tech
- Published on Thursday, 07 July 2011 15:17
- Written by Josh
Instructions for installing your Hobie SideKick AMA stabilization floats on your kayak. This SideKick kit works with most sit-on-top kayaks and likely some sit-inside hulls as well. Inflatable AMA floats can be deflated and fit inside most Hobie kayaks. Adjustable float height to custom tune the amount of stabilization.
Turbo fin install
- Parent Category: Videos
- Category: Hobie Kayak Tech
- Published on Thursday, 07 July 2011 15:15
- Written by Josh
How to install the Turbo Fin kit on your Hobie MirageDrive pedal system. Morgan shows you how and why to upgrade the OEM fins to the longer ST Turbo fins.
MirageDrive leash install
- Parent Category: Videos
- Category: Hobie Kayak Tech
- Published on Thursday, 07 July 2011 15:14
- Written by Josh
A How To video for installing the Hobie MirageDrive leash. I simple accessory that could keep you from loosing the famous pedal unit overboard.
Installing Hobies Anchor Trolley Kit
- Parent Category: Videos
- Category: Hobie Kayak Tech
- Published on Thursday, 07 July 2011 15:13
- Written by Josh
Installing the Hobie Anchor Trolley Kit. This kit allows you to position either an Anchor, Drift Chute or Stake Out Pole at any angle along side your kayak. Using a Hobie Mirage Outback.
Fish finder install
- Parent Category: Videos
- Category: Hobie Kayak Tech
- Published on Thursday, 07 July 2011 15:11
- Written by Josh
Installing a Fish Finder on a Kayak. Morgan shows you how to install the Lowrance X50ds on a Hobie Mirage Outback with the Hobie Fish Finder Installation Kit.
Rod Holder Install on a Hobie Kayak
- Parent Category: Videos
- Category: Hobie Kayak Tech
- Published on Thursday, 07 July 2011 15:07
- Written by Josh
Installing a RAM tube rod holder on a Hobie Mirage Outback fishing kayak.
Hobie eVolve Drive Well Installation
- Parent Category: Videos
- Category: Hobie Kayak Tech
- Published on Thursday, 07 July 2011 15:07
- Written by Josh
Pro Angler Steering Drum Upgrade
- Parent Category: Videos
- Category: Hobie Kayak Tech
- Published on Thursday, 07 July 2011 15:05
- Written by Josh
Hobie Kayak Tech presents a 'how-to' video on upgrading Pro Angler steering drums
Hobie fullsize sounder kit install
- Parent Category: Videos
- Category: Hobie Kayak Tech
- Published on Wednesday, 22 June 2011 10:29
- Written by Josh
Recently Hobie added the Lowrance Elite series of sounders to their range and to go along with them, have followed up with an installation kit to suit. Its not terribly dissimilar to the earlier install kit (of which I wrote an article on recently), though it includes a suitable 9AH battery and various components required to install a sounder with. This kit will work with most sounders on the market (not just the Lowrance Elite series) and is pretty much perfect for most larger sounder units available.
Hobie Kayak Tech have released this video to demonstrate how one might go about using the kit to install a sounder into their kayak.
47 minutes ago
